BBCode Guide

BBCode is a special implementation of HTML. Whether you can actually use BBCode in your posts on the forum is determined by the administrator. In addition, you can disable BBCode on a per post basis via the posting form. BBCode itself is similar in style to HTML: tags are enclosed in square braces [ and ] rather than < and > and it offers greater control over what and how something is displayed. Depending on the template you are using you may find adding BBCode to your posts is made much easier through a clickable interface above the message area on the posting form. Even with this you may find the following guide useful.

BBCode includes tags to allow you to quickly change the basic style of your text. This is achieved in the following ways:

• To make a piece of text bold enclose it in:
  

  Code:

   [b]Hello[/b]

  Result: Hello
  
  
• For underlining use:
  

  Code:

   [u]Hello[/u]

  Result: Hello
  
  
• To italicise text use:
  

  Code:

  [i]Great![/i]

  Result: Great!
  
  
• To strike some text:
  

  Code:

   [strike]test[/strike]

  Result: test

To alter the color or size of your text the following tags can be used. (Keep in mind that how the output appears will depend on the viewers browser and system):

• To change your text color, you can specify a known color (ex: red, blue, yellow, etc.), or an hexadecimal color code (ex: #FFFFFF, #000000):
  

  Code:

  [color=red]Red color (red)[/color] or [color=#FF0000]Red color (#FF0000)[/color]

  Result: Red color (red) or Red color (#FF0000)
  
  
• To change your text size, you must specify the text size in pixel, from 1 (so small you won't see it) to 29 (very huge):
  

  Code:

  [size=9]SMALL[/size] or [size=24]HUGE[/size]

  Result: SMALL or HUGE
  
  
• To change the font, you must specify a recognized font (ex: Verdana, Arial) if the user hasn't got the font, a default one will be displayed :
  

  Code:

  [font=Arial]Arial font[/font] or [font=Comic Sans Ms]Comic sans MS font[/font]

  Result: Arial font or Comic sans MS font

Yes, of course you can; for example to get someones attention you may write:

Code:

[size=18][color=red][b]LOOK AT ME ![/b][/color][/size]

Code:

[b][u]This is incorrect[/b][/u]

Code:

[b][u]This is correct[/u][/b]

There are two ways you can quote text: with a reference or without.

• The reference example, to quote a post wrote by Mr. Blobby, you must enter:
  

  Code:

  [quote="Mr. Blobby"]The text wrote by Mr. Blobby must be placed here[/quote]

  Result :

  Mr. Blobby wrote:The text wrote by Mr. Blobby must be placed here

  
  Remember that you must include the quotation marks "" around the name you are quoting -- they are not optional.
  
  
• The second method allows you to blindly quote something. To use it :
  

  Code:

  [quote]Blind quote[/quote]

  Result :

  Blind quote

If you want to output a piece of code (HTML or other) or in fact anything that requires a fixed width with a Courier-type font, you must use the following BBCode :

Code:

[code]echo "This is some code";[/code]

Code:

echo "This is some code";

An un-ordered list produces a list which entries are one underneath the others and indented with a bullet character.

• To create an un-ordered list, use:
  

  Code:

  [*]Red[*]Blue[*]Yellow[/list]

  Result :
  • Red
  • Blue
  • Yellow
  
  

The second list type gives you the control on what will be displayed before each entry. To create an ordered list, you've got two possibilites :

• A numbered list :

  Code:

  [list=1][*]Do shopping[*]Buy a new computer[*]Yell to its computer when it crashes[/list]

  Result :
  1. Do shopping
  2. Buy a new computer
  3. Yell to its computer when it crashes
  
  
• An alphabetical list :

  Code:

  [list=a][*]First possible answer[*]Second possible answer[*]Third possible answer[/list]

  Result :
  1. First possible answer
  2. Second possible answer
  3. Third possible answer

The BBcode supports several methods to create links, most commonly known under URLs.

• First method, to create for an example a link to forumotion.com you must use :
  

  Code:

  [url=http://www.forumotion.com/]Visit forumotion.com ![/url]

  Result : .
  You'll notice that the link opens a new window, by this way the user can still browse the forums if he wants to.
  
  
• Second method, if you want the link to display directly the URL :
  

  Code:

  [url]http://www.forumotion.com/[/url]

  Result :
  
  
• Third method, this forum owns a functionality called 'Magic Links', that will convert automatically an URL into a clickable link, without needing to insert a BBCode tag nor http://. For an example, by typing

  Code:

  www.forumotion.com

  in your message, it will be automatically converted into a link : .

The BBCode incorporates a tag for including images in your posts. Two very important things to remember when using this tag are: many users do not appreciate lots of images being shown in posts and second, the image you display must already be available on the Internet (it cannot exist only on your computer, for example, unless you run a webserver!). You can upload for free your images on internet by an image hosting such as . To display an image, you need to proceed as following :

Code:

[img]http://illiweb.com/fa/i/forumactif.png[/img]

Code:

[url=http://www.forumotion.com/][img]http://illiweb.com/fa/i/forumactif.png[/img][/url]

Four positions possibilities are proposed :

• Left alignment
  

  Code:

  [left]text aligned to the left[/left]

  Result : text aligned to the left
  
  
• The centering :
  

  Code:

  [center]Text centered[/center]

  Result :
  Text centered
  
  
• 
  Right alignment :
  

  Code:

  [right]Text aligned to the right[/right]

  Result :
  Text aligned to the right
  
  
• The justification :
  

  Code:

  [justify]Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aliquam ac tortor eu dolor mollis malesuada. Nam arcu dui, cursus a, ullamcorper ut, fringilla nec, velit. Duis tempor arcu eu orci. Ut vehicula massa eu est. Sed ac odio. Integer dictum eros. Etiam facilisis sem non lacus. Donec volutpat ligula ac est. Aliquam erat volutpat. Pellentesque justo tellus, porta et, interdum et, consequat sit amet, eros.[/justify]

  Résultat :
  Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aliquam ac tortor eu dolor mollis malesuada. Nam arcu dui, cursus a, ullamcorper ut, fringilla nec, velit. Duis tempor arcu eu orci. Ut vehicula massa eu est. Sed ac odio. Integer dictum eros. Etiam facilisis sem non lacus. Donec volutpat ligula ac est. Aliquam erat volutpat. Pellentesque justo tellus, porta et, interdum et, consequat sit amet, eros.
  
  

You've got two methods to insert a flash animation in your message.

• First method with the flash BBcode:
  

  Code:

  [flash(200,40)]http://illiweb.com/fa/i/forumotion.swf[/flash]

  Result :
  
  
• Second method with the embed-flash BBcode :
  

  Code:

  [embed-flash(200,40)]http://illiweb.com/fa/i/forumotion.swf[/embed-flash]

  Result :

You can post in your messages videos that you encountered on one of those two sites :

• The first site is . You must copy the code in the Embed field and do as following :

  Code:

  [youtube]code - Embed[/youtube]

  
  
• The second site is . You must copy the code in the portable player field and do as following:

  Code:

  [dailymotion]code - lecteur portable[/dailymotion]

The BBCode to insert a frame in a message is identical to the tags used in HTML. To create a frame, you need to start by creating a frame 'table' then insert a 'tr' lign. This lign can contain one or several cells 'td', well as a frame can contain several 'tr' ligns.

• For an example, to create a two ligns and three columns frame, you need to proceed as following :
  

  Code:

  [table][tr][td] Lign 1 - Cell 1 [/td] [td] Lign 1 - Cell 2 [/td] [td] Lign - Cell 3 [/td][/tr] [tr][td] Lign 2 - Cell 1 [/td] [td] Lign 2 - Cell 2 [/td] [td] Lign 2 - Cell 3 [/td][/tr][/table]

  Result :

  Lign 1 - Cell 1	Lign 1 - Cell 2	Lign 1 - Cell 3
  Lign 2 - Cell 1	Lign 2 - Cell 2	Lign 2 - Cell 3

  
  
• You can also add arguments in the BBcode 'table'. These last ones are identical as those used for HTML. You can for an exemple add a bound to the frame above thanks to the 'border' attribute.
  

  Code:

  [table border=1] [tr][td] Lign 1 - Cell 1 [/td] [td] Lign 1 - Cell 2 [/td] [td] Lign 1 - Cell 3 [/td][/tr] [tr][td] Lign 2 - Cell 1 [/td] [td] Lign 2 - Cell 2 [/td] [td] Lign 2 - Cell 3 [/td][/tr][/table]

  Result :

  Lign 1 - Cell 1	Lign 1 - Cell 2	Lign 1 - Cell 3
  Lign 2 - Cell 1	Lign 2 - Cell 2	Lign 2 - Cell 3

  
  Other available attributes are for an example: cellspacing, cellpadding, width, etc.
  

If you wish to make a text scroll horizontally, you need to use the following BBcode :

Code:

[scroll]My message[/scroll]

The second way to make a text scroll is vertically, with the following BBcode :

Code:

[updown]My message[/updown]

If you wish to aerate your message by inserting ligns, you can use this BBcode :

Code:

My first message[hr]My second message

If you wish to put text in index or exposure (useful for maths), two BBcodes are proposed :

• First method, to put in index :
  

  Code:

  x[sub]a+b[/sub]

  Result : xa+b
  
  
• Second method, for the exposure :
  

  Code:

  2[sup]nd[/sup] day

  Result : 2_nd day
  
  

Four BBcodes producing effects on your messages are at your disposal. Although, this codes are only compatible under Internet Explorer with a phpBB2 forum.

• The first is a vertical mirror effect (Vertical symmetry) on the text :
  

  Code:

  [flipv]Vertical mirror effect[/flipv]

  Result : Vertical mirror effect 
  
  
• The second is a horizontal mirror effect (horizontal symmetry) on the text :
  

  Code:

  [fliph]horizontal mirror effect[/fliph]

  Result : horizontal mirror effect 
  
  
• If you wish a blur effect in your text, you can use this BBcode :
  

  Code:

  [blur]Blurred message[/blur]

  Result : Blurred message
  
  
• The last BBcode effect is the fading :
  

  Code:

  [fade]Fading effect[/fade]

  Result : Fading effect

If you wish to obtain a random number depending on an interval, you can use the following BBcode :

• First utilization case, the interval is specified at minimum and maximum :
  

  Code:

  [rand]50,100[/rand]

  Result :

  Random number (50,100) : 77

  
  
  
• Second utilization case, the interval is specified at its maximum :
  

  Code:

  [rand]50[/rand]

  Result:

  Random number (1,50) : 20