The forum of the forums
Would you like to react to this message? Create an account in a few clicks or log in to continue.

groups?

3 posters

Go down

Solved groups?

Post by Poul David March 9th 2022, 9:37 am

groups - I've now figured out how to create a group, but how do I insert a post into the group? - I see nowhere where I can click insert a thread or topic?


Last edited by Poul David on March 10th 2022, 3:46 pm; edited 2 times in total
Poul David
Poul David
Forumember

Posts : 240
Reputation : 2
Language : Danmark

https://dinedebatter.danskforum.net/

Back to top Go down

Solved Re: groups?

Post by skouliki March 9th 2022, 9:48 am

hello

the groups are for members, members belong to groups
has nothing to do with topics or posts
skouliki
skouliki
Manager
Manager

Female Posts : 15391
Reputation : 1709
Language : English,Greek
Location : Greece

http://iconskouliki.forumgreek.com

Back to top Go down

Solved Re: groups?

Post by Poul David March 9th 2022, 9:55 am

skouliki wrote:hello

the groups are for members, members belong to groups
has nothing to do with topics or posts

not understood? - Can a member not write a thread or topic in the group?
Poul David
Poul David
Forumember

Posts : 240
Reputation : 2
Language : Danmark

https://dinedebatter.danskforum.net/

Back to top Go down

Solved Re: groups?

Post by skouliki March 9th 2022, 10:08 am

groups are a label
example moderators. designers, managers

each group has members
example I am moderator , i belong to the moderator group , that group has the green color

each group has permissions, the members of each group can write posts or topics depending on the group permissions
you can read this to the tutorial i gave you previous or just read this part


Group Permissons

To set group permissions you need to go to admin>>>users and groups>>>groups. To see and set the permissions of any group, you will see in the actions column (screen shot above), beside the modify cog, a plus and tick symbol groups - Organizing Groups / Colors in Legend Perms. Clicking that will take you to the permissions page like the screen shot below. You can then select which forums your group will moderate, if any. Click save when finished.

Approving/Denying and Removing Group Members

When a member requests to join a group you moderate, you will be sent an email informing you with a link you can click that will take you to the group requested. Alternatively you can check your groups at any time, by clicking the 'usergroups' link or button in your forum navigation bar. This will then show you a list of all the groups that have been made (excluding hidden ones if you are not the administrator). You can click on any group to see its members and at the very bottom of the group page you will see any requests to join your group as shown in the screen shot below. You can then choose whether to accept or deny a member.

read more here https://help.forumotion.com/t10988-organizing-groups-colors-in-legend?highlight=groups


skouliki
skouliki
Manager
Manager

Female Posts : 15391
Reputation : 1709
Language : English,Greek
Location : Greece

http://iconskouliki.forumgreek.com

Back to top Go down

Solved Re: groups?

Post by Poul David March 9th 2022, 10:18 am

skouliki wrote:groups are a label
example moderators. designers, managers

each group has members
example I am moderator , i belong to the moderator group , that group has the green color

each group has permissions, the members of each group can write posts or topics depending on the group permissions
you can read this to the tutorial i gave you previous or just read this part


Group Permissons

To set group permissions you need to go to admin>>>users and groups>>>groups. To see and set the permissions of any group, you will see in the actions column (screen shot above), beside the modify cog, a plus and tick symbol groups - Organizing Groups / Colors in Legend Perms. Clicking that will take you to the permissions page like the screen shot below. You can then select which forums your group will moderate, if any. Click save when finished.

Approving/Denying and Removing Group Members

When a member requests to join a group you moderate, you will be sent an email informing you with a link you can click that will take you to the group requested. Alternatively you can check your groups at any time, by clicking the 'usergroups' link or button in your forum navigation bar. This will then show you a list of all the groups that have been made (excluding hidden ones if you are not the administrator). You can click on any group to see its members and at the very bottom of the group page you will see any requests to join your group as shown in the screen shot below. You can then choose whether to accept or deny a member.

read more here https://help.forumotion.com/t10988-organizing-groups-colors-in-legend?highlight=groups



thank you I want to study this!

Paul
Poul David
Poul David
Forumember

Posts : 240
Reputation : 2
Language : Danmark

https://dinedebatter.danskforum.net/

Back to top Go down

Solved Re: groups?

Post by skouliki March 9th 2022, 10:19 am

ok just leave the topic open
if you have any other questions i will be glad to help you
skouliki
skouliki
Manager
Manager

Female Posts : 15391
Reputation : 1709
Language : English,Greek
Location : Greece

http://iconskouliki.forumgreek.com

Back to top Go down

Solved groups

Post by Poul David March 9th 2022, 4:03 pm

Hi

I deleted the group again as I could not figure out how to open threads and topic insertions for members and myself!

"Group Permissons

To set group permissions you need to go to admin>>>users and groups>>>groups. To see and set the permissions of any group, you will see in the actions column (screen shot above), beside the modify cog, a plus and tick symbol . Clicking that will take you to the permissions page like the screen shot below. You can then select which forums your group will moderate, if any. Click save when finished."

this can not be done I have been working on it for 3 hours in vain!

Paul

Poul David
Poul David
Forumember

Posts : 240
Reputation : 2
Language : Danmark

https://dinedebatter.danskforum.net/

Back to top Go down

Solved Re: groups?

Post by Ape March 9th 2022, 5:12 pm

Poul David wrote:Hi

I deleted the group again as I could not figure out how to open threads and topic insertions for members and myself!

"Group Permissons

To set group permissions you need to go to admin>>>users and groups>>>groups. To see and set the permissions of any group, you will see in the actions column (screen shot above), beside the modify cog, a plus and tick symbol . Clicking that will take you to the permissions page like the screen shot below. You can then select which forums your group will moderate, if any. Click save when finished."

this can not be done I have been working on it for 3 hours in vain!

Paul


Hello @Poul David Please don't open more topic's about the same problem
Topic merged.


groups? Left1212groups? Center11groups? Right112
groups? Ape_b110
groups? Ape1010
Ape
Ape
Administrator
Administrator

Male Posts : 19436
Reputation : 2010
Language : fluent in dork / mumbojumbo & English haha

http://chatworld.forumotion.co.uk/

Back to top Go down

Solved Re: groups?

Post by Ape March 9th 2022, 5:50 pm

Setting Up A Group:

Admin Control Panel:
ACP >> Users & Groups Tab >> down the left hand side in the tools fine >> Groups >> Group administration >>

groups? Captu512
Fill in the form as you see fit then in the part that says Group moderator : add a name (This can be you the founder)
Then save.

Adding Members To A Group:

Find the Group you have just made and Press the Yellow cog.
groups? Captu513
Scroll down to the bottom and type in the member you want to add.
groups? Captu514
Then Press the add member button, You will need to repeat this until you have added all your members you want in that group.

Giving Group Promotions:

Admin Control Panel:
ACP >> General Tab >> Down the left hand side fine >> Forum >> Categories and forums >>
Find the forum you want that group to see and use and press the yellow cog.
groups? Captu515
you should see something like this.
groups? Captu516
Click The Permissions Tab, You should now see something like this.
groups? Captu517
Just find the Group you have just made and tick / mark the boxes you want the group to have right's to then save.

Please note you must be in advanced mode to see all the right's.

I hope this will help you understand how it all works now Wink




groups? Left1212groups? Center11groups? Right112
groups? Ape_b110
groups? Ape1010
Ape
Ape
Administrator
Administrator

Male Posts : 19436
Reputation : 2010
Language : fluent in dork / mumbojumbo & English haha

http://chatworld.forumotion.co.uk/

skouliki, SLGray and TonnyKamper like this post

Back to top Go down

Solved Re: groups?

Post by Poul David March 10th 2022, 9:20 am

Ape wrote:

Setting Up A Group:

Admin Control Panel:
ACP >> Users & Groups Tab >> down the left hand side in the tools fine >> Groups >> Group administration >>

groups? Captu512
Fill in the form as you see fit then in the part that says Group moderator : add a name (This can be you the founder)
Then save.

Adding Members To A Group:

Find the Group you have just made and Press the Yellow cog.
groups? Captu513
Scroll down to the bottom and type in the member you want to add.
groups? Captu514
Then Press the add member button, You will need to repeat this until you have added all your members you want in that group.

Giving Group Promotions:

Admin Control Panel:
ACP >> General Tab >> Down the left hand side fine >> Forum >> Categories and forums >>
Find the forum you want that group to see and use and press the yellow cog.
groups? Captu515
you should see something like this.
groups? Captu516
Click The Permissions Tab, You should now see something like this.
groups? Captu517
Just find the Group you have just made and tick / mark the boxes you want the group to have right's to then save.

Please note you must be in advanced mode to see all the right's.

I hope this will help you understand how it all works now Wink



thanks for the reply - I will try again today! - Yesterday I could not find the symbol that you had to click on, to open the thread and comment option! - I could only click on change and rights and the special symbol did not appear! - I'm trying your explanation!

Paul
Poul David
Poul David
Forumember

Posts : 240
Reputation : 2
Language : Danmark

https://dinedebatter.danskforum.net/

Back to top Go down

Solved Re: groups?

Post by Poul David March 10th 2022, 10:29 am

Ape wrote:

Setting Up A Group:

Admin Control Panel:
ACP >> Users & Groups Tab >> down the left hand side in the tools fine >> Groups >> Group administration >>

groups? Captu512
Fill in the form as you see fit then in the part that says Group moderator : add a name (This can be you the founder)
Then save.

Adding Members To A Group:

Find the Group you have just made and Press the Yellow cog.
groups? Captu513
Scroll down to the bottom and type in the member you want to add.
groups? Captu514
Then Press the add member button, You will need to repeat this until you have added all your members you want in that group.

Giving Group Promotions:

Admin Control Panel:
ACP >> General Tab >> Down the left hand side fine >> Forum >> Categories and forums >>
Find the forum you want that group to see and use and press the yellow cog.
groups? Captu515
you should see something like this.
groups? Captu516
Click The Permissions Tab, You should now see something like this.
groups? Captu517
Just find the Group you have just made and tick / mark the boxes you want the group to have right's to then save.

Please note you must be in advanced mode to see all the right's.

I hope this will help you understand how it all works now Wink



I'm in Categories and forums, I've created a group and added some members! - but there are no site rules! - I only see my discussion forum with all my categories! I can add new categories, change and rights for each category! - At the top there is a - Reduct all and a + no explanation this symbol! -and next to free debate forum! and to the right topics and posts and add new categories! - There is no yellow cog to be seen!

Paul
Poul David
Poul David
Forumember

Posts : 240
Reputation : 2
Language : Danmark

https://dinedebatter.danskforum.net/

Back to top Go down

Solved Re: groups?

Post by Poul David March 10th 2022, 3:44 pm

Poul David wrote:
Ape wrote:

Setting Up A Group:

Admin Control Panel:
ACP >> Users & Groups Tab >> down the left hand side in the tools fine >> Groups >> Group administration >>

groups? Captu512
Fill in the form as you see fit then in the part that says Group moderator : add a name (This can be you the founder)
Then save.

Adding Members To A Group:

Find the Group you have just made and Press the Yellow cog.
groups? Captu513
Scroll down to the bottom and type in the member you want to add.
groups? Captu514
Then Press the add member button, You will need to repeat this until you have added all your members you want in that group.

Giving Group Promotions:

Admin Control Panel:
ACP >> General Tab >> Down the left hand side fine >> Forum >> Categories and forums >>
Find the forum you want that group to see and use and press the yellow cog.
groups? Captu515
you should see something like this.
groups? Captu516
Click The Permissions Tab, You should now see something like this.
groups? Captu517
Just find the Group you have just made and tick / mark the boxes you want the group to have right's to then save.

Please note you must be in advanced mode to see all the right's.

I hope this will help you understand how it all works now Wink



I'm in Categories and forums, I've created a group and added some members! - but there are no site rules! - I only see my discussion forum with all my categories! I can add new categories, change and rights for each category! - At the top there is a - Reduct all and a + no explanation this symbol! -and next to free debate forum! and to the right topics and posts and add new categories! - There is no yellow cog to be seen!

Paul

I have now written it all down as told here! - As far as I can understand, only an existing forum category can be inserted to be a group! - I have therefore put a new category into the main forum with a name that I want to be a group! - Then I will try to insert it as a group with thread and comment option! - if it does not succeed I will not return again with this problem!
Many thanks for the help!
Paul
Poul David
Poul David
Forumember

Posts : 240
Reputation : 2
Language : Danmark

https://dinedebatter.danskforum.net/

Back to top Go down

Solved Re: groups?

Post by Ape March 10th 2022, 6:34 pm

is this now solved ?


groups? Left1212groups? Center11groups? Right112
groups? Ape_b110
groups? Ape1010
Ape
Ape
Administrator
Administrator

Male Posts : 19436
Reputation : 2010
Language : fluent in dork / mumbojumbo & English haha

http://chatworld.forumotion.co.uk/

Back to top Go down

Solved Re: groups?

Post by skouliki March 10th 2022, 6:39 pm

it is marked as solved
skouliki
skouliki
Manager
Manager

Female Posts : 15391
Reputation : 1709
Language : English,Greek
Location : Greece

http://iconskouliki.forumgreek.com

Back to top Go down

Solved Re: groups?

Post by Ape March 10th 2022, 8:26 pm

Problem solved & topic archived.
Please read our forum rules: ESF General Rules


groups? Left1212groups? Center11groups? Right112
groups? Ape_b110
groups? Ape1010
Ape
Ape
Administrator
Administrator

Male Posts : 19436
Reputation : 2010
Language : fluent in dork / mumbojumbo & English haha

http://chatworld.forumotion.co.uk/

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum